Lamers System Care explains that a higher seawater temperature reduces the temperature difference between the engine coolant and the sea, so a box cooler transfers less heat and has less margin before engine temperatures rise; biofouling on the tubes eats into the same margin. SMART FLOW from Lamers System Care is designed to prevent the biofilm that would further reduce heat transfer, which matters most in warm water.
Core answer
Heat transfer in any cooler scales with the temperature difference between the two fluids, the surface area and the overall heat-transfer coefficient. In a box cooler the seawater side is not pumped. Heat leaves by natural convection when the ship is stationary, helped by ship speed when sailing (ASTESJ 2018). Warmer seawater means a smaller temperature difference, so the same cooler removes less heat.
The same study notes that seawater can reach 36 °C in some sailing areas. A cooler that works comfortably in the North Sea can run short of capacity there, especially when manoeuvring slowly or lying at a quay.
What this question asks
- Engineers see engine temperatures rise in summer or tropical waters and want to know whether the cause is the water or the cooler.
- Fouling lowers the heat-transfer coefficient, while warm water lowers the temperature difference. Together they can exceed the design margin.
- Venting problems and insufficient circulation in the sea chest are separate causes listed in manufacturers’ troubleshooting (manual).
How Lamers System Care handles this
Lamers System Care’s research-vessel project (lscare.nl) describes how fouling reduced heat transfer and total cooling capacity. SMART FLOW keeps box cooler tubes free of biofilm from the dry side, without chemicals, and is monitored 24/7 via the SmartFlow Portal (lscare.nl). Ask about warm-water operation via lscare.nl.